Products

 
 
The X-Ray crystal optic is one of the key component for X-Ray analysis systems:

 

  • X-Ray spectrometry: WDXRF or EDXRF
  • X-Ray diffractometry: powder or crystals

 

 

The X-Ray crystal optic basically achieves 2 functions:

 

  • To shape the X-Ray beam before its interaction with the sample, or before the X-Ray detector
  • To perfectly monochromatize the beam such as to provide the highest level of information to the detector

 

 

Many parameters are stringent in the specification of the X-Ray optic:

 

  • The perfect shaping of the 2d spacing of the crystal such as to preserve the Bragg's angle according to the geometry of the optic
  • Its reflectivity: light level and homogeneity
  • Its wavelength or energy resolution that is the ability to distinguish the X-Ray peaks
 
 

Here is an example of a resolution peak on a large (80mm x 25mm) Si (111) produced by AlpyX:

 

Johann Johansson

Johann and Johansson optics can theoritically produce a focusing on the meridional direction of the X-Ray beam.

Johann configuration can also be used in the Von Hamos configuration, perpendicular to the Rowland circle plane to produce a focused point spectrum.

The choice between the two possibilities is strongly depending on the value of the radius of the Rowland circle and the length of the optic.

 

Only Johansson can rigorously produce the focusing performance.

 

Johansson optics are requiering a high precision process that AlpyX can propose.

 

Miscut orientations are also avalaible.

 

Channel cut

 

 

 

 

AlpyX has the know-how to cut and produce various geometry and dimensions of channel-cut optics including Bartels.

 

We are achieving high performance orientation and finishing of the active surfaces.

 

 

 

 

 

Zero Background diffraction Plates

 

 

 

AlpyX produce high quality zero background diffraction plates for XRD.

Dimensions and orientations on request.

 

 

 

 

 

 

Flat Plates

 

 

 

AlpyX can supply a choice of (h,k,l) cuts of Ge, Si and Quartz mounted or unmounted including a proprietary finishing for optimized performances.

 

 

 

 

 
2D curved crystal optics

 

2D optics

 

 

 

Spherically, toroidally and ellipsoidally 2D curved crystal optics are used for complete focusing of the beam: along both meridional and sagittal directions.

 

These shape of curvatures cannot developp on a plane and thus are inducing a lot of stresses in the crystal, deforming the lattice.

 

AlpyX is working developping new processes in order to keep as much as possible the integrity of the lattice.  

 

 

Repairing

 

 

 

 

After evaluation of your damaged optic, AlpyX can propose to rework or repair it.

 

 

ALPYX 

354 voie Magellan

Batiment Cleanspace

73800 Sainte-Hélène-du-Lac

FRANCE

Silicon channel cut crystal 1

Silicon channel cut crystal